I. the use of Hot melting machine for waste plastic: in recent years, waste plastics recycling, foam plastics in the packaging industry wide, large volume, difficult to transport, led to the rapid development of waste plastics recycling machinery, with the continuous adoption of new technologies, Hot melting machine for recycling EPS and production efficiency has been generally improved rapidly. The utility model has the advantages of high efficiency, space saving, easy transportation to complete products, environmental protection, pollution-free and smoke-free operation to avoid secondary pollution. Complete waste resource regeneration, create benefits.
II. Working Principle
The use of two axis crushing knives in EPS COMPACTING HOT MELTER MACHINERY can effectively break the foamed polystyrene material into smaller pieces and enter the screen. Material can not be further broken into the screen mesh, fall into the screen mesh, and then enter the main machine through screw high-speed rotation, the crushed material will be conveyed to the conical cylinder and the circular cylinder, heated by mica heater, and then the melted material will continue to be conveyed to the moulding square die. Material begins to cool down, and the square object is extruded from the die. According to the required length, it will be automatically cut off by the cutting machine and finished.
III. Technical Parameters:
|
Model |
HM50 |
|
Feeding Size |
400mmx600mm |
|
Screw diameter |
Φ80mm |
|
Screw Length |
1090mm |
|
Screw Speed |
100rpm |
|
Extrusion center height |
300mm |
|
Heating power |
2.7KW |
|
Main motor power |
3KW |
|
Crusher Motor |
2.2KW |
|
Screen Size |
30mm |
|
Blade rotation diameter |
290mm |
|
Blades quantity |
10sets |
|
Blades rotation speed |
120rpm |
|
Size |
2000x1000x1700 |
|
Capacity |
25-30kg/h |
