Our high quality EPS box hot melting machine adopts manual feeding,the material will be crushed by the four shaft blades and conveyed to the barrel of the main machine through the screen.This screw of the main machine can convey the heat the material to melt condition,then and air jam blade cut them to pieces for easy storage and transportation.
Lianguan recycling professional manufacture new technology Waste EPS recycling machine has organized technical staff to make research on both domestic and abroad markets and absorb the international advanced technologies to develop the EPS waste plastic recycling equipment successfully, under the guide ideology of reducing the size of the waste plastic and avoiding secondary pollution.
Technical parameters:
Model |
HM-400 |
Screw diameter |
φ250 mm |
Screw distance |
180 mm |
Screw speed |
150 r/min |
Capacity |
160-200Kg/h |
Screen hole diameter |
50 mm |
Extrusion center height |
366 mm |
Motor power |
22KW |
Heating power |
14KW,3 zones total 14kw |
Crusher motor power |
2.2kwx4 |
Crusher blades quatity |
Four screw 11sets+10sets+11sets+10sets |
Crusher rotation speed |
100r/m |
Size L×W×H |
3400×1880×2550mm |
Weight |
1800 Kg |
Configuration Project |
Standard configuration |
Motor |
Siemens Beide |
Control |
RKC |
Gearbox |
Castle |
Bearing |
ZWZ |
Air Valve |
CHNT |
Electricity Elements |
Main parts use SIEMENS |