EPS/XPS cold compactor
The EPS foam cold press can reduce the size of EPS foam material, and the compression ratio can reach 1:30-1: 50. The compression product is EPS foam plastic block with a density of 350 kg/m3. It is easy to treat EPS foam plastic material into another recycling form.
The EPS foam cold press is mainly used to treat waste paper, EPS foams, EPE PUR EVA and so on.
Through the continuous improvement of the EPS foam compressor, it has achieved a superior performance. EPS foam compressor is based on PLC automatic control system and peripheral circuit control, the performance is quite stable.
First, the volume of the material is reduced by the filter screen on the crusher and the compressor, and then the material will fall onto the screw. The main motor will push the material forward through the screw. Meanwhile, the hydraulic system of the die head will be closed to compress the EPS foam material. The material will become lump, and the volume will be reduced by 30 to 50 times, and it will be easier to carry and transport. All parts of the machine are made up of one machine, which saves cost, energy consumption and space. These EPS bubbles can be broken into smaller volumes again.
The output of CP250 XPS compactor is about 100kg per hour. It is equipped with 2.2kW crusher and 7.5kW screw motor. This type of cold press is suitable for large supermarkets and seafood markets. It can be used in medium-sized EPS waste recycling companies to compress waste materials. Customers usually compress the EPS foam block into 250mmX250mm size.
Technical Parameters:
|
Model |
CP-250 |
|
Capacity |
100kg/h |
|
Screw diameter |
φ290mm Q235-A |
|
Input size |
1000mmx600mm |
|
Screw rotation speed |
36rpm |
|
Crushing blade |
2Sets 9+10pcs |
|
Blade rotation speed |
120rpm |
|
Main motor |
7.5 kw |
|
Crusher motor |
2.2kw X 2 |
|
Hydraulic station motor |
1.5 kw |
|
Production size |
250×250mm |
|
Overall size |
3000×1300×2100 |
|
Weight |
1400Kg |
