Introduction of Hot melting machine for waste plastic
1.This machine with crushing and thermoforming for EPS block, it is a very practical and
economical machine for EPS recycling.
2.Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by the twin shaft blades and conveyed to the barrel of the main machine through the screen.
3.The screw of the main machine can convey and heat the material to melt condition, then extrude them and hydraulic blade cut them to pieces for easy storage and transportation.
4.The shapes of the products can be designed according to customers' requirements.
Working principle of Hot melting machine for recycling EPS
The twin shaft crushing blades are two parallel blade shafts with different rotation
direction. Each blade shaft has 18 blades and is driven by the gear box to crush material that will be conveyed to the barrel through the screen. The material will be sent by the high speed rotary screw to the heating barrel. Then they will be melted under high temperature and extruded to expected shapes.
Expanded polystyrene melting line 200-300kg/h
1. Conveyer Belt 1000
1,Deliver Capacity: 300kg/h
2,Motor Power: 1.5kw
3,Transmission drive: By chain
4,Conveyer belt size: 4000mmx1000mm
5,Weight 600kg
2. EPS Crusher
1. Model: 400
2. Motor Power: 2.2KW x 4
3. Rotation blades: 10+11+10+11 sets
4. Check window install the induction switch
5. Screen hole size: 40mm
6. Capacity: 300kg/h
7. Weight 850kg
3. Fan Delivery
Fan power: 5.5KW
4. Silo
1.Capacity: 15 Cubic Meter
2.Silo material: Filter Fabric
3.Weight 50kg
5. Hot melting Machinery HM400
1.Motor Power: 22KW
2.Screw diameter: 200-250mm
3.Screw rotation speed: 110rpm
4.Capacity: 200~300kg/h
5 Weight 1500kg
6. Electricity element
1.Most the electricity elements will be SIEMENS or SCHNEIDER
2.Weight 200kg