News Time2016.05.15 News Sources Views
How do we maintenance the plastic machinery when it runs ? And this need corresponding plan that is conducive to the operation of machinery. Meanwhile the corresponding requirements of technical performance for security equipment can guarantee safety for equipment and staff effectively.
1. We need inspect on time whether the oil mass of lubricant pump fuel tank and engine base fuel tank is adequate. The reliability of lubrication system should be checked. Lubricate the moving parts and maintenance plastic granulator.
2. We need to inspect on schedule pipeline leak and the condition of fasteners.
3. We should inspect whether plastic machinery’s safety devices are effective. Especially after changing the mold, we need to check whether machinery insurance have been adjusted accordingly. We should check the linkage of ground wire, the insulation of electrical apparatus element and wire aging.
4. Check the oil filter and padding on time. Timely cleaning and replace. Pay attention to whether oil is contaminated and deteriorated invariably. When the hydraulic oil becomes black brown, it stinks, which shows oxidation, namely deterioration. This means the need for updating of hydraulic oil as soon as possible. There are some transparent spots and bright spots in the hydraulic oil, which illustrates the intrusion of impurity or metal powder, thus oil needs changing and filtering.
5. Cooling machine runs every 5 to 10 months, requiring immersion cleaning of carbon tetrachloride. More details: plastics machinery manufacturers http://www.jmwensui.com/
6. The important parts like screw and charging barrel are maintained according to instructions for the use of an article sold.
Maintenance instruction sheet shall be 6, screw, barrel and other important parts of the requirements.
7.Pre-installation check
Devices composed of various parts. Each part like main steel structure, bearing and bolt before installing need to be checked. Simultaneously, we need to make a record whether the surface is antiseptic so that it is prepared for overhaul.
8. Plastic machinery for delivery of equipment maintenance
The machine need to be maintained on schedule according to the rules and regulations when machine runs normally. The routine maintenance is mainly responsible for cleaning, tightening, lubricating, adjusting and corroding. This should be checked every day. And the maintenance is in the designated time for several times. The content centers on repairing, cleaning, lubricating, adjusting, disintegrating and testing.
9. Overhaul requirements of plastic machinery
The overhaul of equipment means that equipment grinds very seriously or is damaged terribly. Mechanical function decreases obviously. It is time for overhaul. For example, the damaged machine has decreasing mechanical power function, increasing fuel consumption, ineffective operation and abnormal sound. Sometimes, equipment can not play the normal function. So this machine need a comprehensive repair. We should be delineated according to overhaul and arrange corresponding progress of work.
10. Scrap plastic machinery During the process of overhaul, the machine is likely to be scrapped. The professional staff is responsible for overhaul with a record and acceptance check. With past or near a certain length of time, the machine should supply acceptance of qualified equipment installation confirm with record of scrap.
